Testimonials

Cohasset Collision Center

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Helping to improve the drying time of waterbase paint.
2. How did the Walcom Thermo Dry system help you solve your problem?
   Blow drying with the Walcom heat is 10 times faster than with cold air.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   After my first three jobs, I would not want to paint without it!
4. Is there anything else you would like to add?
   The heat in the spray gun provides consistent paint viscosity to the paint from day to day, and improves the coat of the sealer and clearcoat.

Michael L. Nichols
Cohasset Collision Center
Cohasset, MA

Ian’s Body Work

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Drying/flash times mainly; but along with that improvement; it has improved application, useage and dye back.
2. How did the Walcom Thermo Dry system help you solve your problem?
   By heating and drying the spray air, it has made the product faster which means less booth operating times.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   The Walcom unit has been very effective; but have not experienced the high humidity summer weather. I am sure it will help even more during the high humidity this summer.
4. Is there anything else you would like to add?
   I have been in the collision repair industry for 23 years, including time as a rep for a major automotive paint manufacturer specializing in OEM automotive coatings. All I can add is… great product and support!

David Walsh
Ian’s Body Works
Winston-Salem, NC

Color Systems

1. As a paint supplier what challenges or improvements were you looking to solve with the Walcom Thermo Dry System for your paint and customer?
   We were looking for a faster dry time in humid weather for our PPG WATERBORN BASECOAT.
2. Has the Walcom Thermo Dry system performed to you and your customers expectations?
   The Walcom System surpassed our expectations. Humidity is no longer a facter. What an amazing difference.
3. If you were to recommend The Walcom Thermo Dry system to a colleague, how would you describe its effectiveness and our service to you?
   It makes better coverage on basecoat, urethane primer dry like it is on steroids, and makes urethane clear flow out of the spray gun with no effort.
4. What paint line or lines do you represent and did the system perform across product lines? Primer/ Sealer, Base Coat, Clear Coat?
   All of the PPG products performed faster with a reduction in ounces needed across the board.

Stephen Lauro
Color Systems
Warwick, RI

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Flash water-based products; atomize clean coat.
2. How did the Walcom Thermo Dry system help you solve your problem?
   We do not even use fans to dry water-based; flash times increased without force dry.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Install was quick and neat. System was explained — how to use and service.
4. Is there anything else you would like to add?
   If you are spraying water-based products, this system is a must. Try it in your booth before you install air movers.

Anthony Ferraiolo
A&R Body Specialty and Collision Works
Wallingford, CT

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Drying water-borne paint at a faster rate to increase our productivity.
2. How did the Walcom Thermo Dry system help you solve your problem?
   Increased productivity by 50% to 60%.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Hands down the best service provided, very professional and tailored the job to our needs. Made a system that will be able to be used in three locations with a very easy hookup to activate two at a time.
4. Is there anything else you would like to add?
   I recomend this product to help make your shop more profitable by decreasing paint drying time. We get in and out of the booth at a much faster rate.

Todd Chilcote
SDR (Small Damage Repair)
Cockeysville, MD

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Flatter finish, reduce dry time, color layout and amount of paint used.
2. How did the Walcom Thermo Dry system help you solve your problem?
   The biggest thing was the color layout and orientation of the metallic.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Service is good, this product is very effective.
4. Is there anything else you would like to add?
   Glad to be using your products.

Toby Jasmin & Meghan Burke
J.A.S. Auto Body
White River Jct, VT

Rob,
I am writing this letter to you to tell you about the great success that we are having with the WALCOM TD3. This unit is as simple as installing in your customer’s shop and letting them spray. When our techs try to pick it up a couple of days later, the shop does not want it to leave. It has been the easiest piece of equipment we have ever sold. This unit sells itself. Our customers tell us it improves dry time’s production and overall appearance on every job. These units have more than exceeded our expectations. I would recommend these to anyone who sprays water or even solvent. Our techs said they will never do a demo without it and our currently installing one on our Demo Trailer. If anyone has any questions, please do not hesitate to use me as a reference.

Best Regards,
Dave Esposito
Business Manager
Paul Francis & Co.
New Haven, CT 06512

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Needed to dry our water base paint at a faster pace. Your unit along with future cures air system work well together.
2. How did the Walcom Thermo Dry system help you solve your problem?
   Quicker flash times resulted.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Our process has saved considerable time. We went from 40-45 minutes to 15-20 minutes for flash – cure bake.
4. Is there anything else you would like to add?
   Seems like a very dependable system. We have had no issues since installed.

Don Roy
Don Roy’s Auto Body
Chicopee, MA

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   The Walcom Thermo Dry System allows us to get cars in and out of the booth faster and cleaner and delivered to the customer faster.
2. How did the Walcom Thermo Dry system help you solve your problem?
   We are able to get approx. 1 or 2 extra cars done daily on average. Cleaner paint jobs means we are spending less time cleaning up paint jobs before delivering. Walcom provides savings with gas usage with faster dry times.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   The dryer quickly pays for itself. If any questions arise after purchase, CC Design is quick to respond to any question or concerns that you may have with your new system.
4. Is there anything else you would like to add?
   The only thing that I can think of at the time being is, if you give the TD3 a try, you will love the product. We just purchased ours a few months ago and are highly satisfied with this product and we know you will be, too.

Roger Doward
One Stop Auto Body
Hudson, NH

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   To make paint dry faster.
2. How did the Walcom Thermo Dry system help you solve your problem?
   We can paint more cars per day.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Yes, tried other things, but this works.
4. Is there anything else you would like to add?
   Now we can run one compressor, not two. Save on electricity, too.

Tony
Keene Auto Body
Woburn, MA

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Implementing a water based paint system, without needing a costly spraybooth upgrade.
2. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   100% effective.
3. Is there anything else you would like to add?
   A mandatory piece of equipment for waterbased paint.

Heidi Kendall
Weston Auto Body
Wolfeboro, NH

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   We were looking for faster drying time since we switched to a water base paint.
2. How did the Walcom Thermo Dry system help you solve your problem?
   Great system. We are able to do more paint cycles per day. Paint work is cleaner due to the speed of the drying time. Also saving time on buffing, and the clear just lays down real nice.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Will pay for itself due to the increase of cycle times and decrease of buffing times. Also, they provide great service to you.

Frank Borgess
Village Collision
Brookline, MA

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   To paint more consistent in all weather, speed up drying on high humid days.
2. How did the Walcom Thermo Dry system help you solve your problem?
   With the TD3, paint dries faster in all weather conditions, no matter how humid.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   Innovative top of the line; very knowledable staff.
4. Is there anything else you would like to add?
   AMAZING.

Thomas Olivieri
Greenville Collision RRF
Johnston, RI

1. What challenges or problem were you looking to solve with your Walcom Thermo Dry System?
   Faster drying time for water-borne basecoat. Reduce the amount of dirt in paint work.
2. How did the Walcom Thermo Dry system help you solve your problem?
   We now have a tool that can help dry waterborne base coat faster. This has helped to improve overall production and morale in the paint department.
3. If you were to recommend Walcom products to a friend or colleague, how would you describe its effectiveness and our service to you?
   This tool can help you to improve overall paint productivity. Basecoats and clear coats dry faster, the overall paint jobs come out cleaner. The training, install and service done by Collision Center Design was excellent.
4. Is there anything else you would like to add?
   This tool has been one of the best tools we have added to our facility.

Tim Joslin, Director
Banks Collision Center
Concord, NH

My name is Mark Abate, owner of Sound Choice Audio & Performance (SCAP). SCAP installed the TD3 into our down draft paint booth about 2 months ago. The very first time we used the TD3 we could notice a difference in the way the paint was getting sprayed out. We have found that when using the TD3 there is less time needed on the wet sand and buffing, because the clean and heated air coming out of the Walcom TD3 allows the paint to flow out much better than untreated air.

At SCAP we pride ourselves on perfection; with every part we spray we can see the difference the TD3 makes. Our primers are now so flat that we can start sanding with 320, saving us time. And time is money! You can really see a difference in all the materials we spray as for how the Walcom TD3 helps in adding a perfect job. You may have seen our latest car we built; it is the 2010 SCAP Heritage CAMARO. We debuted it at the 2009 SEMA show, where it was recognized as the #1 2010 CAMARO.

We at SCAP are believers in the ability of the TD3 to help deliver the best results — that’s why we use it. You can see some of our other works at scapusa. Looking forward to the future! Thank you, WALCOM, for developing the TD3. It’s been a pleasure to use such a product that makes a difference.

Your fan,
Mark Abate

March 21, 2009

Mr. Ira Sherman
PB&E Specialists

Dear Ira:

I must say, after knowing and working with you for the last 20 years, this is the best product you have brought to my shop. Out of all the products you’ve brought in, this was the most expensive… but by far the most amazing one. I can’t thank you enough for leaving your demo unit with me to try out a few months ago. After testing it a few times I couldn’t let you take it back.

Here I sit, less than six months later, overseeing my crew produce higher quality finishes. This product has reduced drying time, lowered my paint consumption and has eliminated loss of brilliancy and spotting.

I emphatically stand behind the TD3 system and highly recommend this unit to any shops looking to increase quality of work as well as productivity. Please have anyone interested in discussing the product call me.

Thanks again, Ira.

Best Regards,
Robbie Berman